Step 1
Open VPN Tracker.
‣Click “ Add Connection” (or click the + button in the lower left corner).
‣Select “SonicWALL” from the list.
‣Select your SonicWALL model (e.g. NSA Series).
‣Click “Create”


Step 2


Click “Configure” and switch to the “Basic” tab if it is not already displayed.


VPN Gateway : Enter your SonicWALL’s public IP address or its host name from your → Configuration Checklist 

Network Configuration : Select “DHCP over VPN” if your SonicWALL is set up for DHCP over VPN →

Virtual Adapter Setting is “DHCP Lease” or “DHCP or Manual Configuration”). Select “Manual” if your SonicWALL is not set up for DHCP over VPN →Virtual Adapter Setting is “None”

Topology: Select “Host to Network” if → Set Default Route as this Gateway is unchecked on your SonicWALL. Select “

Host to Everywhere” if it is checked. Additional configuration is required for Host to Everywhere, see → Host to Everywhere for details.



Step 3


Connect to VPN 

You will be prompted to enter the Preshared key.

Select Stored in Keychain and press OK

ICIDvpn3nt3r



Step 4

Enter username and password provided by IT department


Thank you